MakerBot METHOD X ABS Filament Gray (.65kg, 1.43lb)

SKU

MakerBot-375-0026A

Manufacturer No

375-0026A

MakerBot

Rating:

80 % of 100

1 Reviews Add Your Review

$69.00

Discover additional comparable items within this product category. MakerBot: 3D Printers for Educators & Professionals

This product has been discounted from the manufacturer and is no longer available.

manufacturer No -375-0026A

MakerBot METHOD X ABS Filament Gray (.65kg, 1.43lb). The Smart Spool includes an integrated RFID chip that transmits information to the printer, including the material type, color, and amount remaining. The spool also has desiccant, which helps to maintain low moisture levels inside the drawer bay.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

MakerBot METHOD X ABS Filament Gray (.65kg, 1.43lb)

Printer Compatibility

Method X

Extruder Compatibility

Material Extruder 1XA.

Support Extruder 2XA.

Support Material

Stratasys® SR-30

Dimmensional Accuracy

Finished part dimensional accuracy of ± 0.2mm (± 0.007in)

TECH SPECS Imperial Metric

Heat Deflection (ASTM 648, 66 psi) 210°F 99°C

Flexural Modulus (ASTM D790, 15 mm/min) 377,000 psi 2,600 MPa

Tensile Strength at yield (ASTM D638, 50 mm/min) 0.806 psi 43 MPa

Tensile Modulus (ASTM D638, 50 mm/min) 348,000 psi 2,400 MPa

Strain at Yield - Elongation (%) >5.6% >5.6%

Notched Impact Strength (ASTM D256) 3.6 ft-lb/in 192 J/m

WARNING

This Filament - when used in the operation of 3D Printers or 3D Pens - can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer.

Add to Wish List

Specification